The Ricoh GEN4L printhead is suitable for a range of oil, water, solvent and UV printers. This printhead has an integrated heater and thermistor.
The Ricoh GEN4L printhead is suitable for a range of oil, water, solvent and UV printers, including the original D.Gen Teleios Grande, D.Gen Teleios (TJ-2600) and Teleios (TJ-3333). This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty.
Specifications - Size: 13,2 x 120 x 75,5 mm (excluding cables) - Head Materials: SST, Ni and Epoxy Adhesive (direct contact with ink) - Nozzle Plate Surface: Non-wet coating - Number of Nozzles: 2 x 192 nozzles - Nozzle Spacing: 0,1693 mm - Piezo Type: D33 Stacked PZT - Temperature Control: Integrated Heater and Thermistor - Operator Temperature range: Up to 80° C - Native Drop Volume: 15 pl - Drop Volume Range: 15-45 pl - Jetting Frequency: Up to 30 kHZ - Life: 100 billion actuations per nozzle
This printhead carries a manufacturer warranty and 30 days signprinthead.com (replace with a new printhead) Country of origin : Japan
Use For: AmicaSystems PA32 d.gen Teleios Grande (3333TX) d.gen Teleios (TJ-2600) d.gen Teleios Grande (TJ-3333) d.gen Teleios XL (XL2600) d.gen Artrix GTII
Ricoh GEN5 Water Printhead (Cable: 650mm) MH5420 This Ricoh GEN5 water printhead with a cable length of 550mm is suitable for a range of water-based printers.
Original Mimaki JV33 Printhead DX5 Cabezal MP-M007947 for Mimaki CJV30 JV33 JV5 DX5 Original Mimaki JV33 130/CJV-130 JV5 Eco-Sol Print Head With Memory Card Mimaki dx5 JV33 CJV30 JV5 Print head MP-M007947 Mimaki JV33/JV5 Print Head M007947 with Memory Board
Printheads that are worn or damaged must be replaced immediately. Each Zebra printhead is easy to install and builds to engineering standards for the reliability and sustainable performance of your printer.