New Toshiba Printhead 0TSBC0145201F - Toshiba B-EX4T2 Series Printhead 600 Dpi
Toshiba TEC B-EX4T2 - 0TSBC0145201F Printheads for Toshiba Label Printers
Toshiba is easy to install and built to engineering standards for the reliability and continuous performance of your printer.
Replacing these print bars is possible with all Toshiba printers and is usually always economical. The mechanics of the printer and housing are designed for multiples of printhead performance.
When ordering, pay attention not only to the type of printer, but also to the printing technology (direct thermal or thermal transfer) and resolution (dpi). Some printers are available in up to four resolution variants (150dpi, 203 dpi, 300 dpi, or 600 dpi.
Mimaki Head Assy - M027970 (Old M024721 / M026059) Original Mimaki M027970 UJV100-160 JV100-160 TS100 Print Head Assy M026059 UV Printhead Запасные части для УФ-принтера Mimaki UJV100 160, оригинальная Фотографическая головка, фотография, сделано в Японии
This Mimaki printhead is suitable for Mimaki UJV100 printers. This is the original Mimaki part (number MP-M027970 replacing M026059).
Brand: ZEBRA Printer Model: 110PAX3 Right Hand Part Number: 43038M Print Resolution 300 dpi
Zebra printhead replacement products deliver quality, reliability and performance for printheads that have become worn down or damaged. Every Zebra printhead is easy to install, and made to exacting engineering standards for consistent performance from your printer.
Zebra printhead replacement products deliver quality, reliability and performance for printheads that have become worn down or damaged. Every Zebra printhead is easy to install, and made to exacting engineering standards for consistent performance from your printer.
Mimaki JFX200-2513 Druckkopf MP-M022625 Mimaki JFX200-2513 Head for Maintenance Assy M022625 (incl. Heater)
This Mimaki printhead GEN5 is suitable for Mimaki JFX200-2513 printers. This printhead GEN5 is suitable for Mimaki JFX200-2513 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022625 replacing M017004 and M015028).
Good quality SD XTRA WAX/RESIN 8135200 compatible ribbon, highly resistant to abrasion and chemicals Compatible Markem printers:Smart Date X60 (53mm), High speed Near Edge print head type for high speed printing on flexible packaging at 300 dpi Print speed 800 (mm/s) Article Part Number:KCE-53-12PAT1-MKME Part Number:ENM10058307, ENM10061947 Width:53MM