Mutoh XpertJet I9472 Print Head Assy (with Base) DH-40275
This printhead is suitable for Mutoh XpertJet 1641SR. This is the original Mutoh part (number DH-40275). It is the same printhead as Mutoh printhead DH-40274, with the base.
Mutoh XpertJet I9472 Print Head Assy (with Base) DH-40275
This printhead is suitable for Mutoh XpertJet 1641SR. This is the original Mutoh part (number DH-40275). It is the same printhead as Mutoh printhead DH-40274, with the base.
Specifications: - Printhead type: Piezo Printhead - Nozzle configuration : 180 nozzles x 8 lines/head - Drop Volume Range (pl): 3.5 to 35 - Resolutions: 360x360, 360x720, 720x720, 720x1080, 720x1440 & 1440x1440 dpi - Head Heights: Low: 1,5 mm / Middle: 2.5 mm / High: 4.0 mm
This printhead carries a manufacturer warranty and 30 days signprinthead.com warranty (replace with a new printhead) Country of origin : Japan
It is highly recommended to replace the head cables together with a new printhead.
New Printhead For Zebra TLP2824 203dpi thermal Printer P/N G105910-148
Zebra printhead replacement products deliver quality, reliability and performance for printheads that have become worn down or damaged. Every Zebra printhead is easy to install, and made to exacting engineering standards for consistent performance from your printer.
Zebra supplies are made by Zebra, for Zebra printers, to the highest standards. Theyare all extensively tested to ensure best print quality and performance before they arebranded and introduced into the range. Tested on the printers they will be used on,in the combinations they will be used in, they are developed specifically for ourusers' requirements.
This Kit F/S Printhead CA4 is suitable for the Océ Arizona 350 GT / 350 XT printers. This is the original Océ part (number 3010108132 replacing 3010106120).
Mimaki JFX200-2513 Druckkopf MP-M022625 Mimaki JFX200-2513 Head for Maintenance Assy M022625 (incl. Heater)
This Mimaki printhead GEN5 is suitable for Mimaki JFX200-2513 printers. This printhead GEN5 is suitable for Mimaki JFX200-2513 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022625 replacing M017004 and M015028).
Mutoh XpertJet I9472 Print Head Assy (with Base) DH-40275
This printhead is suitable for Mutoh XpertJet 1641SR. This is the original Mutoh part (number DH-40275). It is the same printhead as Mutoh printhead DH-40274, with the base.
English
Français
