Toshiba is easy to install and built to engineering standards for the reliability and continuous performance of your printer.
Replacing these print bars is possible with all Toshiba printers and is usually always economical. The mechanics of the printer and housing are designed for multiples of printhead performance.
When ordering, pay attention not only to the type of printer, but also to the printing technology (direct thermal or thermal transfer) and resolution (dpi). Some printers are available in up to four resolution variants (150dpi, 203 dpi, 300 dpi, or 600 dpi.
0TSBC0145101F – Toshiba TEC B-EX4T2 Type 2 Printhead, 300 dpi
For Toshiba TEC B-EX4T2 Type 2 Flathead Printers: BEX4T2TS12M01 BEX4T2TS12M02 BEX4T2TS12M03 BEX4T2TS12M04
Mimaki JFX200-2513 Druckkopf MP-M022625 Mimaki JFX200-2513 Head for Maintenance Assy M022625 (incl. Heater)
This Mimaki printhead GEN5 is suitable for Mimaki JFX200-2513 printers. This printhead GEN5 is suitable for Mimaki JFX200-2513 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022625 replacing M017004 and M015028).
Honeywell printheads feature advanced thermal control to provide advanced diagnostics. Honeywell It also features better print quality, and a durable coating for better abrasion resistance and longer service life. Printhead replacement is reduced, which increases printer uptime. Users will also notice a substantial reduction in power consumption.
Mutoh XpertJet I9472 Print Head Assy (with Base) DH-40275
This printhead is suitable for Mutoh XpertJet 1641SR. This is the original Mutoh part (number DH-40275). It is the same printhead as Mutoh printhead DH-40274, with the base.
Printheads that are worn or damaged must be replaced immediately. Each Zebra printhead is easy to install and builds to engineering standards for the reliability and sustainable performance of your printer.