Original Kyocera Inkjet Printhead KJ4B-0300 Water Base Standard Version For Hanway Highjet 2500B
This Kyocera KJ4B-0300 is designed for high speed printing with water-based inks, in 600 dpiwith a maximum drive frequency of 30kHz. It delivers high quality with a small drop volume of 5pl at 75 m/min by making use of 2,656 nozzles arranged across 108.25 mm wide print swathe with 0.042mm pitch, resulting in 30.000 drops per second.The Kyocera KJ4B-QA is equipped with internal filters to preventparticles to reach the nozzle plate and an internal heater that adjusts the temperature.
The Kyocera KJ4B-0300printhead is available in 3 different models:
- standard for all printers other than MS and EFI Reggiani - MS printers including the head cable - EFI Reggiani printers including the head cable Please select the printhead model carefully as they are not interchangeable.
Zebra printhead replacement products deliver quality, reliability and performance for printheads that have become worn down or damaged. Every Zebra printhead is easy to install, and made to exacting engineering standards for consistent performance from your printer.
The printhead / thermal strip / printhead are the parts that can be moved and replaced in the printer. Thermal strips are used in thermal TSC 98-0420004-00LF Original Printhead ME240 203dpi
Zebra supplies are made by Zebra, for Zebra printers, to the highest standards. Theyare all extensively tested to ensure best print quality and performance before they arebranded and introduced into the range. Tested on the printers they will be used on,in the combinations they will be used in, they are developed specifically for ourusers' requirements.
The Zebra thermal printheads are specifically designed for use in the Z6M+ Tabletop Printers. Certified Zebra printheads ensure the highest quality, reliability and performance out of your thermal printer.