Original Konica Minolta Solvent Printhead KM1024/14pl KM1024 MNB Print Heads for Allwin/Human/Taimes Printer Original and new KM1024 MNB printhead/konica minolta 1024 14pl head print for allwin human myjet eco solvent printer
Konica KM1024 MNB 14PL Printhead For DGI VelaJet VE-3204
original Konica Minolta Solvent Printhead KM1024/14pl KM1024 MNB Print Heads for Allwin/Human/Taimes Printer original and new KM1024 MNB printhead/konica minolta 1024 14pl head print for allwin human myjet eco solvent printer
Konica KM1024 MNB 14PL Printhead For DGI VelaJet VE-3204
The Konica Minolta KM1024 MN print head is a robust, shear mode, piezo on-demand print head that is usable in both binary and 8 level greyscale mode, providing variable drop size and higher print quality without the use of additional print heads. The Konica Minolta KM1024 MN print head is a vast improvement over the KM512 print head series, offering twice the print width and double the level of greyscale. Konica Minolta piezo on-demand inkjet heads are driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further. The Konica Minolta KM1024 MN print head has 1024 nozzles with a droplet size of 14 pico litre and a native resolution of 360 dpi. The print head is compatible with oil based and solvent inks. This print head is also known as the Konica Minolta KM1024 MNB. This is Konica original print head and it includes the necessary waveform information. It carries a product warranty.
Specifications: - Technology: On-Demand Piezo Electric (Shared Wall 3 Cycle) - Native Resolution: 360 dpi - Cal. Droplet Size: 14 pico litre - Max. Drops in Greyscale: 8 drops - Tot. Amount of Nozzles: 1024 (512 nozzles per line) - Nozzle Spacing: 70.5 microns - Print Width: 72 mm - Firing Frequency: 12.8 kHz - Ink Compatibility: Oil Based and Solvent Inks - Heater: not integrated
This printhead carries a manufacturer warranty and 30 days signprinthead.com warranty (replace with a new product) Country of origin : Japan
Use For: Agfa Anapurna M1600 Agfa Anapurna M² Agfa Anapurna M2050 Agfa Anapurna M2500 Allwin C8 DGI VE-3206 DGI VelaJet VE-3204 DGI VE-3204D Dilli Neo Titan FB2513-06DW Dilli Neo Titan UVT-1604D Scorpion ASLAN 5100 Scorpion 3300 SE
Printronix Printhead is designed to optimize the performance of your Printronix printer. Designed with an easy-to-use snap-in feature for quick replacement for reduced downtime and can be upgraded in the field.
Printheads that are worn or damaged must be replaced immediately. Each Zebra printhead is easy to install and builds to engineering standards for the reliability and sustainable performance of your printer.
Worn or damaged print heads should be replaced immediately. All Printronix printheads are easy to install and meet strict engineering standards for continued printer reliability and performance.
Honeywell's 010043-920 printheads feature advanced thermal control to provide advanced diagnostics. Honeywell It also features better print quality, and a durable coating for better abrasion resistance and longer service life. Printhead replacement is reduced, which increases printer uptime. Users will also notice a substantial reduction in power consumption.
Zebra supplies are made by Zebra, for Zebra printers, to the highest standards. Theyare all extensively tested to ensure best print quality and performance before they arebranded and introduced into the range. Tested on the printers they will be used on,in the combinations they will be used in, they are developed specifically for ourusers' requirements.
Resolution 300 Dpi
Original Konica Minolta Solvent Printhead KM1024/14pl KM1024 MNB Print Heads for Allwin/Human/Taimes Printer Original and new KM1024 MNB printhead/konica minolta 1024 14pl head print for allwin human myjet eco solvent printer
Konica KM1024 MNB 14PL Printhead For DGI VelaJet VE-3204