Mimaki JFX200-2513 Druckkopf MP-M022625 Mimaki JFX200-2513 Head for Maintenance Assy M022625 (incl. Heater)
This Mimaki printhead GEN5 is suitable for Mimaki JFX200-2513 printers. This printhead GEN5 is suitable for Mimaki JFX200-2513 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022625 replacing M017004 and M015028).
Mimaki JFX200-2513 Druckkopf MP-M022625 Mimaki JFX200-2513 Head for Maintenance Assy M022625 (incl. Heater)
This Mimaki printhead GEN5 is suitable for Mimaki JFX200-2513 printers. This printhead GEN5 is suitable for Mimaki JFX200-2513 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022625 replacing M017004 and M015028).
Specifications: -Dimensions: 89 x 25 x 69 mm (excluding cables) -Head materials: SST, Nickel alloy and Epoxy Adhesive -Nozzle plate surface: Coated SST -Number of nozzles: 4 x 320 nozzles -Nozzle spacing: 0.1693 mm -Nozzle density: up to 600 npi -Piezo yype: D33 Stacked PZT -Temperature control: Integrated Heater and Thermistor -Operator temperature range: Up to 80° C -Native drop volume: 7 pl -Drop volume range: 7 - 35 pl -Drop velocity: 7 m/s -Jetting frequency: Up to 60 kHZ -Life: 100 billion actuations per nozzle
This printhead carries a manufacturer warranty and 30 Days Signprinthead.com Warranty Country of origin : Japan
Zebra supplies are made by Zebra, for Zebra printers, to the highest standards. Theyare all extensively tested to ensure best print quality and performance before they arebranded and introduced into the range. Tested on the printers they will be used on,in the combinations they will be used in, they are developed specifically for ourusers' requirements.
Markem Imaje Part Number:501650 ROHM Part Number:NM3004-UA10A Model MP104 MKII (104mm) Spare parts for Imaje MP104 MKII (300dpi) thermal transfer printer Resolution 300 dpi
Brand: SATO Resolution: 203dpi Product Condition: New Sato WWGT05810 Printhead use for Sato GT408E Printhead
Replacing these print bars is possible with all Sato printers and is usually always economical. The printer mechanics and the housing are designed for a multiple of the printhead performance.
Worn or damaged print heads should be replaced immediately. All Printronix printheads are easy to install and meet strict engineering standards for continued printer reliability and performance.
Printheads that are worn or damaged must be replaced immediately. Each Zebra printhead is easy to install and builds to engineering standards for the reliability and sustainable performance of your printer.
Original Mimaki Ujv100-160 Jv100-160 Ts100 Print Head Assy M026059 UV Printhead Mimaki Sublimation Jv100-160 Ts100 Print Head Sol Assy M026509 Original Mimaki JV100 Print Head Sol.Assy - MP- M026509
Mimaki JFX200-2513 Druckkopf MP-M022625 Mimaki JFX200-2513 Head for Maintenance Assy M022625 (incl. Heater)
This Mimaki printhead GEN5 is suitable for Mimaki JFX200-2513 printers. This printhead GEN5 is suitable for Mimaki JFX200-2513 printers. It has two and four colour support, 8 levels of grayscale and up to 600 npi nozzle density. This is the original Mimaki part (number M022625 replacing M017004 and M015028).