The Galaxy Printhead PH 256/80 HM is an 80pL ink jet printhead offering complete fluid support and signal processing capabilities for a wide range of jetting fluids.
The Galaxy Printhead PH 256/80 HM is an 80pL ink jet printhead offering complete fluid support and signal processing capabilities for a wide range of jetting fluids.
Specifications: -80 picoliter calibrated drop size -Resolutions up to 450 dpi -Number of addressable jets : 256 -Nozzle spacing: 254 microns [0.010 in.] -Nozzle diameter: 52 microns -Calibrated drop size: 80 picoliters -Adjustment range for drop size: 75 - 85 picoliters -Drop size variation, 1 sigma: 5% -Jet straightness, 1 sigma: 5 mrad [0.29°] -Nominal drop velocity: 8 m/sec -Drop velocity variation, 1 sigma: 5% -Crosstalk, maximum: 5% -Operating temperature range: up to 125°C [257°F] -Fluid viscosity range (at jetting temperature): 8 - 20 cP -Compatible jetting fluids: Hot melt - Maximum operating frequency: 12 kHz -Electrical interface: RS-422 -Ink filter: 8 microns absolute -Meniscus vacuum : 6.3 - 8.7 mBar [2.5 - 3.3 in. wg] -Lung vacuum: 750 mBar [22 in. Hg gage]
The head comes with manufacturer 1 year warranty and 30 Days signprinthead.com warranty Country of origin : Japan
Mutoh XpertJet I9472 Print Head Assy (with Base) DH-40275
This printhead is suitable for Mutoh XpertJet 1641SR. This is the original Mutoh part (number DH-40275). It is the same printhead as Mutoh printhead DH-40274, with the base.
Zebra supplies are made by Zebra, for Zebra printers, to the highest standards. Theyare all extensively tested to ensure best print quality and performance before they arebranded and introduced into the range. Tested on the printers they will be used on,in the combinations they will be used in, they are developed specifically for ourusers' requirements.
Worn or damaged print heads should be replaced immediately. All TSC printheads are easy to install and meet strict engineering standards for continued printer reliability and performance.
Original Printhead for TSC T2N Thermal Printer 203dpi 257341-003
Original thermal printhead Part Number R14223000 SATO for printer model TG312 Printhead
This SATO Thermal Printhead is a powerful label printer, enabling you to produce on-demand labels with crisp, detailed text. You can print many high-quality address labels because this thermal printer has an innovative direct thermal element.
Genuine 300dpi replacement printhead for Zebra GT800 desktop printers
Original Zebra P1073117-007 Thermal Printhead For GT800 Printer Resolution 300 dpi
Condition New
Fujifilm Dimatix Spectra Galaxy PH 256/80HM
The Galaxy Printhead PH 256/80 HM is an 80pL ink jet printhead offering complete fluid support and signal processing capabilities for a wide range of jetting fluids.