Konica KM1800i SHC printhead is a fast and reliable solution for applications requiring high quality such as Coding and marking, Packaging applications, Plastic card decoration, Security applications, Printed electronics.
Konica KM1800i SHC printhead is a fast and reliable solution for applications requiring high quality such as Coding and marking, Packaging applications, Plastic card decoration, Security applications, Printed electronics.
KM1800iSHC Printhead is:
-84kHz shear mode actuation and native 600 dpi resolution over 75mm print swathe. -Simple to integrate, tough and reliable with good fluid compatibility. -Designed to be used in high quality single-pass print systems. Primarily designed for UV inks it can also be used with higher viscosity water-based inks or hot melt inks. -Using proven bulk piezoelectric technology to deliver 3.5pl drop volumes at 600 dpi resolution in a narrow 19.8mm footprint. -Designed to be operated in a wide range of different orientations. The printhead is suitable for use with recirculating ink systems for example for white or metallic inks. printheads can be used in binary or greyscale (3bit) modes. -Proven in Konica Minolta’s B2 sheet-fed KM-1 printer as well as Industrial Inkjet’s Mono and ColourPrint HiQ series.
specifications: -Available ink types: UV, Solvent, Water-based -Technology: Independent channel, on-demand piezo -Number of nozzles: 1776 (296 x 6 rows) -Channel resolution: 42.3μm pitch (600 dpi: 6 rows x 100 dpi) -Grey scale: 8 levels -Typical frequency: 80kHz -Drive voltage: 18 +/- 3V -Printing width: 75.14 mm -Overall row spacing: 4.74 mm -Drop velocity: 6.0 m/sec -Dimensions: Height 106.82 mm x Width 19.8 mm x Length 137.4 mm Weight Less than 205 gm -Drop size: 3.5pl -Max frequency: 84kHz
This printhead carries 1 year manufacturer warranty and 30 days signprinthead.com warranty. Country of origin : Japan
Brand: SATO Resolution: 203dpi Product Condition: New Sato WWGT05810 Printhead use for Sato GT408E Printhead
Replacing these print bars is possible with all Sato printers and is usually always economical. The printer mechanics and the housing are designed for a multiple of the printhead performance.
Worn or damaged print heads should be replaced immediately. All Printronix printheads are easy to install and meet strict engineering standards for continued printer reliability and performance.
Zebra printhead replacement products deliver quality, reliability and performance for printheads that have become worn down or damaged. Every Zebra printhead is easy to install, and made to exacting engineering standards for consistent performance from your printer.
The printhead / thermal strip / printhead are the parts that can be moved and replaced in the printer. Thermal strips are used in thermal TSC 98-0420004-00LF Original Printhead ME240 203dpi
Konica KM1800i SHC-C Printhead
Konica KM1800i SHC printhead is a fast and reliable solution for applications requiring high quality such as Coding and marking, Packaging applications, Plastic card decoration, Security applications, Printed electronics.